Huawei NetEngine80E Configuration Manual - Reliability page 401

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Last Local Diagnostic
Bind Application
Session TX TmrID
Session Init TmrID
PDT Index
Session Description
--------------------------------------------------------------------------------
Run the shutdown command on GE 1/0/0 of Router A. You can view that the BFD session is
Down and the Eth-Trunk status is still Up.
[RouterA] display bfd session all verbose
--------------------------------------------------------------------------------
Session MIndex : 256
--------------------------------------------------------------------------------
Local Discriminator
Session Detect Mode
BFD Bind Type
Bind Session Type
Bind Peer Ip Address
NextHop Ip Address
Bind Interface
FSM Board Id
Min Tx Interval (ms)
Actual Tx Interval (ms): 10
Local Detect Multi
Echo Passive
Destination Port
Proc interface status
WTR Interval (ms)
Active Multi
Last Local Diagnostic
Bind Application
Session TX TmrID
Session Init TmrID
PDT Index
Session Description
--------------------------------------------------------------------------------
[RouterA] display interface eth-trunk 1
Eth-Trunk1 current state : UP
Line protocol current state : UP
Last line protocol up time: 2007-11-23, 11:52:49
Current system time: 2010-08-30 18:04:12
Description: Eth-Trunk1 Interface
Route Port,Hash arithmetic : According to flow,Maximal BW: 4G, Current BW: 4G, The
Maximum Transmit Unit is 1500
Internet Address is 10.1.1.1/24
IP Sending Frames" Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc90-5851
Physical is ETH_TRUNK
-----------------------------------------------------
PortName
-----------------------------------------------------
GigabitEthernet1/0/0
Issue 02 (2014-09-30)
Total UP/DOWN Session Number : 1/0
Total UP/DOWN Session Number : 1/0
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds input rate 0 bits/sec, 0 packets/sec
Realtime 0 seconds output rate 0 bits/sec, 0 packets/sec
Input: 0 packets,0 bytes
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Output:0 packets,0 bytes
0 unicast,0 broadcast,0 multicast
0 errors,0 drops
Input bandwidth utilization
Output bandwidth utilization : 0.01%
Status
DOWN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: No Diagnostic
: No Application Bind
: --
Session Detect TmrID
: --
Session WTR TmrID
: FSM-0|RCV-0|IF-0|TOKEN-0
: --
(One Hop) State : Down
: 10
Remote Discriminator
: Asynchronous Mode Without Echo Function
: Interface(GigabitEthernet1/0/0)
: Static
: 224.0.0.184
: 224.0.0.184
: GigabitEthernet1/0/0
: 1
TOS-EXP
: 10
Min Rx Interval (ms)
Actual Rx Interval (ms): 10
: 3
Detect Interval (ms)
: Disable
Acl Number
: 3784
TTL
: Disable
Process PST
: 300000
: 3
: Control Detection Time Expired
: No Application Bind
: --
Session Detect TmrID
: --
Session WTR TmrID
: FSM-0|RCV-0|IF-0|TOKEN-0
: --
: 0.00%
Weight
5 BFD Configuration
Name : to_link1
1
: --
: --
: 11
: 7
: 10
: 30
: --
: 255
: Disable
: --
: --
384

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents