Huawei NetEngine80E Configuration Manual - Reliability page 609

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[P-GigabitEthernet2/0/0] undo shutdown
[P-GigabitEthernet2/0/0] quit
[P] ospf
[P-ospf-1] area 0
[P-ospf-1-area-0.0.0.0] network 2.2.2.9 0.0.0.0
[P-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[P-ospf-1-area-0.0.0.0] network 10.1.2.0 0.0.0.255
[P-ospf-1-area-0.0.0.0] quit
[P-ospf-1] quit
# Configure PE2.
[PE2] interface loopback 1
[PE2-LoopBack1] ip address 3.3.3.9 32
[PE2-LoopBack1] quit
[PE2] interface gigabitethernet 1/0/0
[PE2-GigabitEthernet1/0/0] ip address 10.1.2.2 24
[PE2-GigabitEthernet1/0/0] undo shutdown
[PE2-GigabitEthernet1/0/0] quit
[PE2] ospf
[PE2-ospf-1] area 0
[PE2-ospf-1-area-0.0.0.0] network 3.3.3.9 0.0.0.0
[PE2-ospf-1-area-0.0.0.0] network 10.1.2.0 0.0.0.255
[PE2-ospf-1-area-0.0.0.0] quit
[PE2-ospf-1] quit
After the configurations, OSPF is enabled on PE1 and PE2, and loopback1 routes are reachable
and ping operations are successful between PE1 and PE2.
Take the display on PE1 as an example.
<PE1> display ip routing-table
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destination/Mask
<PE1> ping 10.1.2.2
PING 10.1.2.2: 56
--- 10.1.2.2 ping statistics ---
Step 3 Enable MPLS and LDP on the MPLS backbone network.
# Configure PE1.
[PE1] mpls lsr-id 1.1.1.9
[PE1] mpls
[PE1-mpls] quit
[PE1] mpls ldp
Issue 02 (2014-09-30)
Destinations : 9
Proto
1.1.1.9/32 Direct 0
2.2.2.9/32 OSPF
3.3.3.9/32 OSPF
10.1.1.0/24 Direct 0
10.1.1.1/32 Direct 0
10.1.1.2/32 Direct 0
10.1.2.0/24 OSPF
127.0.0.0/8 Direct 0
127.0.0.1/32 Direct 0
data bytes, press CTRL_C to break
Reply from 10.1.2.2: bytes=56 Sequence=1 ttl=254 time=200 ms
Reply from 10.1.2.2: bytes=56 Sequence=2 ttl=254 time=60 ms
Reply from 10.1.2.2: bytes=56 Sequence=3 ttl=254 time=90 ms
Reply from 10.1.2.2: bytes=56 Sequence=4 ttl=254 time=90 ms
Reply from 10.1.2.2: bytes=56 Sequence=5 ttl=254 time=90 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 60/106/200 ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Routes : 9
Pre Cost Flags NextHop
0 D 127.0.0.1
10 2 D 10.1.1.2
10 3 D 10.1.1.2
0 D 10.1.1.1
0 D 127.0.0.1
0 D 10.1.1.2
10 2 D 10.1.1.2
0 D 127.0.0.1
0 D 127.0.0.1
8 Ethernet OAM Configuration
Interface
InLoopBack0
GigabitEthernet1/0/0
GigabitEthernet1/0/0
GigabitEthernet1/0/0
GigabitEthernet1/0/0
GigabitEthernet1/0/0
GigabitEthernet1/0/0
InLoopBack0
InLoopBack0
592