Huawei NetEngine80E Configuration Manual - Reliability page 124

Hide thumbs Also See for NetEngine80E:

Table of Contents

HUAWEI NetEngine80E/40E Router

Configuration Guide - Reliability

4.7 Configuring a Unicast VRRP Backup Group

This section describes how to configure a unicast VRRP backup group to implement the master/

backup status negotiation between two devices on a Layer 3 network.

4.8 Configuring Basic Functions of a VRRP IPv6 Backup Group

This section describes how to create a VRRP IPv6 backup group, configure basic VRRP IPv6

functions, implement the master/backup IPv6 mode, and optimize VRRP IPv6 backup group

4.9 Configuring an mVRRP IPv6 Backup Group

When multiple VRRP IPv6 backup groups coexist, they can be bound to an mVRRP IPv6 backup

group, decreasing VRRP Advertisement packets to be sent and minimizing network bandwidth

consumption. The mVRRP IPv6 backup group determines the active and standby links

connected to a dual-homing network.

4.10 Configuring VRRP IPv6 Association

VRRP IPv6 association helps a VRRP IPv6 backup group rapidly perform a master/backup

VRRP switchover if a network link fails. This ensures proper service data forwarding.

4.11 Maintaining VRRP

This section describes how to maintain VRRP by deleting VRRP statistics, and monitoring

VRRP operations.

4.12 Configuration Examples

This section provides VRRP configuration examples. Each configuration example includes

networking requirements, configuration roadmap, data preparation, configuration procedure,

and configuration files.

Issue 02 (2014-09-30)

Huawei Proprietary and Confidential

4 VRRP Configuration

Netengine40e