Checking The Configurations - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
l
----End

5.11.6 Checking the Configurations

By viewing the adjusted BFD parameters, you can check whether the configurations are
successful.
Prerequisites
The configurations for BFD parameter adjustment are complete.
Context
Procedure
l
Issue 02 (2014-09-30)
2. Run:
bfd
BFD is enabled globally and the BFD global view is displayed.
3. Run:
tos-exp tos-value static
The priority of all the static BFD sessions is set.
tos-value is an integer ranging from 0 to 7.
The default priority is 7.
Setting the Priority for all the dynamic BFD Sessions
1. Run:
system-view
The system view is displayed.
2. Run:
bfd
BFD is enabled globally and the BFD global view is displayed.
3. Run:
tos-exp tos-value dynamic
The priority of all the dynamic BFD sessions and static BFD sessions with
automatically negotiated discriminators is set.
tos-value is an integer ranging from 0 to 7.
The default priority is 7.
NOTE
Before viewing BFD session information, you must set session parameters and create the session.
Run the display bfd configuration { all | static [ name bfd-name ] | discriminator local-
discr-value | dynamic | peer-ip peer-ip [ vpn-instance vpn-instance-name ] } [ verbose ]
to check BFD configurations.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 BFD Configuration
356