Huawei NetEngine80E Configuration Manual - Reliability page 276
Hide thumbs
Also See for NetEngine80E:
- Configuration manual (1301 pages) ,
- Configuration manual - reliability (761 pages) ,
- Installation manual (169 pages)
Table of Contents
Advertisement
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
--- 10.100.1.1 ping statistics ---
Step 2 Configure basic VRRP functions on QinQ termination sub-interfaces.
# Configure an mVRRP backup group with the VRID of 10 on GE 1/0/1.1 and configure common
VRRP backup groups on other sub-interfaces of NPE1.
[NPE1] interface gigabitethernet1/0/1.1
[NPE1-GigabitEthernet1/0/1.1] qinq vrrp pe-vid 10 ce-vid 100
[NPE1-GigabitEthernet1/0/1.1] vrrp vrid 10 virtual-ip 10.1.1.1
[NPE1-GigabitEthernet1/0/1.1] vrrp vrid 10 priority 120
[NPE1-GigabitEthernet1/0/1.1] admin-vrrp vrid 10
[NPE1-GigabitEthernet1/0/1.1] quit
[NPE1] interface gigabitethernet1/0/1.100
[NPE1-GigabitEthernet1/0/1.100] qinq vrrp pe-vid 10 ce-vid 101
[NPE1-GigabitEthernet1/0/1.100] vrrp vrid 100 virtual-ip 10.100.1.200
[NPE1-GigabitEthernet1/0/1.100] quit
[NPE1] interface gigabitethernet1/0/1.101
[NPE1-GigabitEthernet1/0/1.101] qinq vrrp pe-vid 10 ce-vid 201
[NPE1-GigabitEthernet1/0/1.101] vrrp vrid 101 virtual-ip 10.101.1.200
[NPE1-GigabitEthernet1/0/1.101] quit
[NPE1] interface gigabitethernet1/0/1.102
[NPE1-GigabitEthernet1/0/1.102] qinq vrrp pe-vid 10 ce-vid 301
[NPE1-GigabitEthernet1/0/1.102] vrrp vrid 102 virtual-ip 10.102.1.200
[NPE1-GigabitEthernet1/0/1.102] quit
[NPE1] interface gigabitethernet1/0/1.103
[NPE1-GigabitEthernet1/0/1.103] qinq vrrp pe-vid 10 ce-vid 401
[NPE1-GigabitEthernet1/0/1.103] vrrp vrid 103 virtual-ip 10.103.1.200
[NPE1-GigabitEthernet1/0/1.103] quit
# Configure an mVRRP backup group with the VRID of 10 on GE 1/0/1.1 and configure common
VRRP backup groups on other sub-interfaces of NPE2.
[NPE2] interface gigabitethernet1/0/1.1
[NPE2-GigabitEthernet1/0/1.1] qinq vrrp pe-vid 10 ce-vid 100
[NPE2-GigabitEthernet1/0/1.1] vrrp vrid 10 virtual-ip 10.1.1.1
[NPE2-GigabitEthernet1/0/1.1] admin-vrrp vrid 10
[NPE2-GigabitEthernet1/0/1.1] quit
[NPE2] interface gigabitethernet1/0/1.100
[NPE2-GigabitEthernet1/0/1.100] qinq vrrp pe-vid 10 ce-vid 101
[NPE2-GigabitEthernet1/0/1.100] vrrp vrid 100 virtual-ip 10.100.1.200
[NPE2-GigabitEthernet1/0/1.100] quit
[NPE2] interface gigabitethernet1/0/1.101
[NPE2-GigabitEthernet1/0/1.101] qinq vrrp pe-vid 10 ce-vid 201
[NPE2-GigabitEthernet1/0/1.101] vrrp vrid 101 virtual-ip 10.101.1.200
[NPE2-GigabitEthernet1/0/1.101] quit
[NPE2] interface gigabitethernet1/0/1.102
[NPE2-GigabitEthernet1/0/1.102] qinq vrrp pe-vid 10 ce-vid 301
[NPE2-GigabitEthernet1/0/1.102] vrrp vrid 102 virtual-ip 10.102.1.200
[NPE2-GigabitEthernet1/0/1.102] quit
[NPE2] interface gigabitethernet1/0/1.103
[NPE2-GigabitEthernet1/0/1.103] qinq vrrp pe-vid 10 ce-vid 401
[NPE2-GigabitEthernet1/0/1.103] vrrp vrid 103 virtual-ip 10.103.1.200
[NPE2-GigabitEthernet1/0/1.103] quit
# After completing the preceding configurations, run the display vrrp brief command on each
NPE.
The command output on NPE1 is as follows:
Issue 02 (2014-09-30)
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 70/122/190 ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VRRP Configuration
259
Advertisement
Table of Contents
