Huawei NetEngine80E Configuration Manual - Reliability page 798

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
----End
Checking the Configurations
Run the display y1731 statistic-type oneway-delay md md-name ma ma-name [ count count-
value ] command on the device that initiates one-way frame delay measurement to check
statistics about the delay in unidirectional frame transmission.
Run the display y1731 statistic-type command to view statistics about the delay in
unidirectional frame transmission.
<HUAWEI> display y1731 statistic-type oneway-delay md md1 ma ma1
Latest one-way delay statistics:
--------------------------------------------------------------------------------
Index
--------------------------------------------------------------------------------
Issue 02 (2014-09-30)
Scenario Procedure
Point-to- 1. Run:
multipoint
scenario
2. Run:
One-way frame delay measurement is implemented for the link between the local MEP
and a remote MEP identified by an ID or a MAC address.
– If the local MEP has not learned the MAC address of the remote MEP, the MAC
address of the remote MEP must be specified to implement one-way frame delay
measurement.
– If the local MEP has learned the MAC address of the remote MEP, the ID of the
remote MEP can be used to implement one-way frame delay measurement.
NOTE
Currently, you can check the configuration of one-way frame delay measurement on in VPLS networking
by using the NMS that matches the current device version.
Delay(usec)
1 10000
2 10000
3 10000
4 10000
5 10000
6 10000
7 10000
8 10000
9 10000
10 10000
11 10000
12 40000
13 10000
14 10000
15 10000
16 10000
17 10000
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
test-id test-id
A test instance is configured.
delay-measure one-way continual send test-id test-id
Proactive one-way frame delay measurement is configured for a
PW.
Delay variation(usec)
-
0
0
0
0
0
0
0
0
0
0
30000
30000
0
0
0
0
8 Ethernet OAM Configuration
781