Huawei NetEngine80E Configuration Manual - Reliability page 218

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
3.
Issue 02 (2014-09-30)
[NPE1] interface gigabitethernet 2/0/0
[NPE1-GigabitEthernet2/0/0] mpls
[NPE1-GigabitEthernet2/0/0] mpls ldp
[NPE1-GigabitEthernet2/0/0] quit
[NPE1] interface gigabitethernet 2/0/1
[NPE1-GigabitEthernet2/0/1] mpls
[NPE1-GigabitEthernet2/0/1] mpls ldp
[NPE1-GigabitEthernet2/0/1] quit
# Configure NPE2.
[NPE2] interface gigabitethernet 2/0/0
[NPE2-GigabitEthernet2/0/0] mpls
[NPE2-GigabitEthernet2/0/0] mpls ldp
[NPE2-GigabitEthernet2/0/0] quit
[NPE2] interface gigabitethernet 2/0/1
[NPE2-GigabitEthernet2/0/1] mpls
[NPE2-GigabitEthernet2/0/1] mpls ldp
[NPE2-GigabitEthernet2/0/1] quit
After the configuration is complete, LDP sessions can be set up between UPEs and the
NPEs. Run the display mpls ldp session command. You can view that the "Status" in the
output is "Operational".
Take NPE1 as an example.
[NPE1] display mpls ldp
LDP Session(s) in Public Network
------------------------------------------------------------------------------
Peer-ID Status
------------------------------------------------------------------------------
1.1.1.9:0 Operational DU
2.2.2.9:0 Operational DU
5.5.5.9:0 Operational DU
------------------------------------------------------------------------------
TOTAL: 3 session(s) Found.
LAM : Label Advertisement Mode
Create a Martini administrator VSI on UPEs.
# Configure UPE1.
[UPE1] mpls l2vpn
[UPE1-l2vpn] quit
[UPE1] vsi admin-vsi1 static
[UPE1-vsi-admin-vsi1] pwsignal ldp
[UPE1-vsi-admin-vsi1-ldp] vsi-id 10
[UPE1-vsi-admin-vsi1-ldp] peer 3.3.3.9 upe
[UPE1-vsi-admin-vsi1-ldp] peer 4.4.4.9 upe
[UPE1-vsi-admin-vsi1-ldp] quit
[UPE1-vsi-admin-vsi1] encapsulation ethernet
[UPE1-vsi-admin-vsi1] admin-vsi
[UPE1-vsi-admin-vsi1] quit
# Configure UPE2.
[UPE2] mpls l2vpn
[UPE2-l2vpn] quit
[UPE2] vsi admin-vsi2 static
[UPE2-vsi-admin-vsi2] pwsignal ldp
[UPE2-vsi-admin-vsi2-ldp] vsi-id 20
[UPE2-vsi-admin-vsi2-ldp] peer 3.3.3.9 upe
[UPE2-vsi-admin-vsi2-ldp] peer 4.4.4.9 upe
[UPE2-vsi-admin-vsi2-ldp] quit
[UPE2-vsi-admin-vsi2] encapsulation ethernet
[UPE2-vsi-admin-vsi2] admin-vsi
[UPE2-vsi-admin-vsi2] quit
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
session
LAM SsnRole
Passive
Passive
Passive
SsnAge Unit : DDD:HH:MM
4 VRRP Configuration
SsnAge KA-Sent/Rcv
000:00:02 12/12
000:00:02 9/9
000:00:02 10/10
201