Preconfiguration Set Up; Set Up The Nms As A Dhcp Client; Install The Officeconnect On A Tabletop; Cable The Bridge/Router - 3Com -1623 Getting Started

Preconfiguration Set Up
This section describes the things you need to do before
performing the actual network configuration.

Set Up the NMS as a DHCP Client

Refer to the documentation that came with your PC
operating system for information on how to perform this
set up.
Install the OfficeConnect on a Tabletop
Attach the plastic feet supplied with your OfficeConnect
bridge/router; see Figure 2.
CAUTION: Do not restrict air flow around the sides and
back of the bridge/router.
Figure 2 Attaching Plastic Feet to OfficeConnect
Remove feet from their adhesive backing.
Attach feet to the bottom of the chassis,
using the semi-circle marks for placement.

Cable the Bridge/Router

Figure 3 shows the back panel connectors on the
OfficeConnect bridge/routers. Refer to this figure when you
attach or plug in cables.
Bridge/Router
Preconfiguration Set Up 7