3.8
Adjustment of the Paper Feeding System
3.8.1
Sheet sideways deviation caused by paper feeding
<Procedure>
The center of the printed image shifts to the front
side. Move the guide to the front side (Arrow
(A) direction in the lower figure).
Feeding direction
Fig. 3-40
Bypass feeding
1) Loosen the screen.
2) Move the entire guide to the front or rear side.
3) Tighten the screw.
(A)
Fig. 3-42
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ADJUSTMENT
[Rear]
Center
[Front]
(B)
The center of the printed image shifts to the rear
side. Move the guide to the rear side (Arrow
(B) direction in the lower figure).
Feeding direction
Drawer feeding
1) Loosen 2 screws.
2) Move the entire guide to the front or rear side.
3) Tighten the screws.
( B )
( A )
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
3 - 50
[Rear]
Center
[Front]
Fig. 3-41
Fig. 3-43