Paper Feeding System - Toshiba e-STUDIO556 Service Manual

3.10 Paper Feeding System

3.10.1 General Description
This unit picks up a sheet of paper from the drawer, tandem LCF or bypass tray and transports it to the
transfer position.
The clutch controls the drive from the motor and drives each roller. Also, each sensor detects the
transferring status of the sheet of paper. Fig. 3-86 shows the positioning of each roller and sensor from
the first drawer to the registration roller. Fig. 3-87 shows the positioning of each roller and the sensor of
the tandem LCF.
Moreover, the composition of the paper feeding unit differs depending on the destination
(machine version). The 4-drawer composition is for JPC. The composition of the 2 drawers and
tandem LCF is for other destinations.
No.
1 Bypass pickup roller
2 Bypass feed roller
3 Bypass separation roller
4 Bypass transport roller
5 Registration roller (metal)
6 Registration roller (rubber)
7 Intermediate transport roller
8 Transport roller
e-STUDIO556/656/756/856(Ver03)
OUTLINE OF THE MACHINE
5
15
7
6
8
9
10
11
Fig. 3-37
Name
3 - 58
4 2
1
3
14
13
12
No.
9 Drawer pickup roller
10 Drawer feed roller
11 Drawer separation roller
12 Drawer feed sensor
13 Drawer transport sensor
14 Intermediate transport sensor
15 Registration sensor
—
© 2012 TOSHIBA TEC CORPORATION All rights reserved
Name