1 TROUBLESHOOTING FOR THE HARDWARE
6
When the finisher is installed, close the Bridge Kit
cover.
7
Close the automatic duplexing unit cover.
Paper misfeed in the Bridge Kit
1
Open the cover holding the handle of the Bridge Kit.
2
Remove the misfed paper inside the Bridge Unit.
If the misfed paper cannot be removed because the right
side is caught by the fuser unit, follow the steps on
"Paper misfeed in the fuser unit".
3
Close the Bridge Kit cover.
Paper misfeed in the Finisher and the Hole Punch Unit
Paper misfeed in the upper receiving tray
1
Raise the lever and open the upper receiving tray of
the finisher.
26
Clearing a Paper Misfeed
P.24
2
1