Twin Color Copy / Mono Color Copy Adjustment - Toshiba e-STUDIO 5540C Service Manual

6.2.19

Twin color copy / mono color copy adjustment

The density of the color specified on the touch panel is adjusted in the mono color copy or twin color
copy mode. This adjustment is reflected to both mono color and twin color copying.
<Adjustment Mode (05)>
Code
Y
Magenta 7644-0 7644-1 7644-2 7644-3 The larger the value is, the darker the density
Yellow 7645-0 7645-1 7645-2 7645-3
YellowGreen 7646-0 7646-1 7646-2 7646-3
Cyan 7647-0 7647-1 7647-2 7647-3
Pink 7648-0 7648-1 7648-2 7648-3
Red 7649-0 7649-1 7649-2 7649-3
Orange 7650-0 7650-1 7650-2 7650-3
Green 7651-0 7651-1 7651-2 7651-3
Blue 7652-0 7652-1 7652-2 7652-3
Purple 7653-0 7653-1 7653-2 7653-3
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the code of the color to be adjusted and press the [START] button.
(3) Select the color to be subjected to density adjustment with digital keys (0, 1, 2 or 3), and press
the [START] button.
0: Y
1: M
2: C
3: K
(4) Key in an adjustment value. (To correct the value once keyed in, press the [CLEAR] button.)
(5) Press the [OK] or [INTERRUPT] button to store the value in memory.
 The equipment goes back to the ready state.
(6) For resetting the value, repeat step (2) to (5).
(7) Turn ON the power of the equipment and make a copy.
(8) If the desired image quality has not been attained, repeat step (1) to (7).
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
Subcode
M C K
6 - 46
Remarks
becomes, and the smaller the value is, the
lighter the density becomes. When "255" is
set, the specified solid color is used for
printing. When "0" is set, nothing is printed.
For example, in case of "Red", the color when
"Red" is specified becomes blue if you set as
follows:
(Y) 7649-0=0
(M) 7649-1=128
(C) 7649-2=255
Acceptable value: 0 to 255 (Default: 128)
Notes:
• If a large value is set for all of YMCK,
offsetting may occur. Make an
adjustment while checking the
image.
• If "0" is set for all four colors of
YMCK, when a color is specified for
the adjustment item, nothing is
printed.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved