Separation Roller - Toshiba e-STUDIO555 Service Manual

15.5.15 Separation roller

(1) Take off the RADF front cover.
P.15-15 "15.5.2 RADF front cover"
(2) Take off the RADF rear cover.
P.15-16 "15.5.3 RADF rear cover"
(3) Remove 4 screws and take off the feeder
upper guide unit.
(4) Remove 1 screw and take off the separation
roller holder. Then take off the separation
roller unit.
(5) Remove 1 E-ring and 1 bushing and then
take off the separation roller.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Fig. 15-52
Fig. 15-53
Fig. 15-54
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 27
e-STUDIO555/655/755/855
15