Options Dialog - Teledyne T3SP Series Operator's Manual

Change x/y-mask
Set reference manually
Live

2.5.4 Options Dialog

Some program settings can be changed in the Options Dialog. This informa-
tion is persistent and restored on each startup of the program.
Common tab:
•
The user name is saved automatically with the samples in the data
files (*.sqc).
•
The users email address.
•
The company name and address is printed e.g. in the PDF reports.
•
If Load Project on Startup is checked, the last known project file is
automatically reloaded on startup.
•
If Restore Windows Position is checked, the last known window ar-
rangement is restored.
•
The software automatically saves backups in the user's application
folder. The backup interval can be set (minutes). If set to "0", imme-
diate backup is activated, if set to "-1", backup is completely turned
off (this is NOT recommended).
Change the tolerance mask x- and y-limits to current axis
for all displayed traces (TDR/DTDR mode only)
Change the reference position (point in time to be
indicated in nanoseconds) to a user-defined value. Make
sure the current reference measurement is not empty
(see section 5.1.2).
Enable live trace (only available in Quick Operation
Mode, not for full 2-port mode).
T3SP-Series Operator's Manual
17
931776 RevB