View Menu; Run Window; Figure 5-5: Deepview - Run Window - Teledyne 440 System Manual

5 – Operating Software
It is recommended that you save a configuration file for each survey. You can then
restore this configuration file to give the settings for the next job.

5.3.2 View Menu

5.3.2.1 Run Window

The Run Window is the most important and informative display of the 440 System. Anyone who will
operate or maintain the system should therefore spend some time to make themselves familiar with the
layout of the window and the information that it shows.

Figure 5-5: DeepView - Run Window

Controls and Features of the Run Window Controls
❐
The Title Bar shows the names of the program and of the window. The right-hand end
includes the standard buttons to minimise, maximise and close the main DeepView window.
❐ The Menu Bar includes the five menu headers described under
mands" on page
appropriate hot-key combination – [ALT]+[underlined hot-key characters]. The Menu Bar also
includes buttons to minimise, maximise and close the Run Window.
❐ The DeepView Toolbar includes the buttons described in
26. These tools control the functions of the DeepView for Windows program.
❐
The Run Window Toolbar includes the buttons described under 'Run Window tools' on
page 5-14. These tools control functions within the Run Window only.
5-14
5-11. To access the menu and sub-menu commands, click on them or use the
© Teledyne TSS
NOTE
section 5.3.1 "Menu com-
section 5.3.4 "Toolbars" on page 5-
DPN 402196 Issue 4.1