Description Of The Application Windows; Main Window - Teledyne T3SP Series Operator's Manual

•
If the connection to the device failed, retry to connect by pressing
CTRL-U or via the menu Extras. If you are not able to establish a con-
nection, check the troubleshooting section
•
Like other RF-measurement systems, the device needs some time to
warm-up for performing stable and accurate measurements. During
the warm-up phase, measurements are prohibited. If the tempera-
ture is stable, the status bar shows OK. If you try to measure during
the warm-up phase, the measurement is aborted, accompanied by an
audio warning and the notification Device temperature instable.

2.5 Description of the Application Windows

2.5.1 Main Window

The Main Window (Fig. 1) allows the user to organize the measurement cam-
paigns. The spreadsheet format is used to prepare sample lists, which can
be worked off accordingly. The main functionality for organizing the data,
results and further common tasks (e.g. saving, loading, exporting of data)
can be controlled via the main menu. "At a glance" information and mea-
surement results are also available.
All project relevant information can be stored in mas Project Files. Older
software versions used the sqc format, these store less information and
should therefore no longer be used.
The information saved in mas Project Files are:
•
Traces, masks, results and settings for each sample
•
Calibration and reference measurements
•
Calibration kit data
T3SP-Series Operator's Manual
14 for further information.
11
931776 RevE