CTRL-U or via the menu Extras. If you are not able to establish a con-
nection, check the USB-drivers in your device manager.
•
Like other RF-measurement systems, the device needs some time to
warm-up for performing stable and accurate measurements. During
the warm-up phase, measurements are prohibited. If the tempera-
ture is stable, the status bar shows OK. If you try to measure during
the warm-up phase, the measurement is aborted, accompanied by an
audio warning and the notification Device temperature instable.
2.5 Description of the Application Windows
2.5.1 Main Window
Fig. 1: Main Window with sample list and control elements
T3SP-Series Operator's Manual
10
931776 RevB