Summary Of Front Panel Check And Calibration Controls - Teledyne 300 Instruction Manual

Example 4: to perform zero check once per day at 10:30 pm and a span check once per
week starting at 11:30 pm, 12/20/93.
3.5 Summary of front panel check and calibration
controls
The calibration controls are summarized below in terms of the button sequences used to
access them.
Button Sequence
CALZ
CALZ-ZERO-ENTR
CALZ-EXIT
CALS
CALS-CONC-ENTR
CALS-SPAN-ENTR
CALS-EXIT
CAL
CAL-ZERO-ENTR
CAL-CONC-ENTR
CAL-SPAN-ENTR
CAL-EXIT
SETUP-ACAL-SEQ1
SETUP-ACAL-SEQ2
SETUP-ACAL-SEQ3
P/N 02163G Teledyne API Model 300 CO Analyzer Instruction Manual - Page 34
4. STARTING TIME: 23:30
5. DELTA DAYS: 7
6. DELTA TIME: 00:00
7. DURATION: 15
8. CALIBRATE: OFF
1. Select any one of SEQx and program as example 1.
2. Select any other SEQx and program as example 3. Avoid setting
two or more sequences at the same time of the day.
CALIBRATION CONTROLS
Function
Begin zero check
Adjust CO conc. to zero
Exit zero check
Begin span check
Expected CO span value
Adj. CO conc. to span val.
Exit span check
Begin M-P cal.
Adj. CO conc. zero value
Expected CO span value
Adj. CO conc. to span val.
Exit M-P cal.
Setup auto-cal SEQ1
Setup auto-cal SEQ2
Setup auto-cal SEQ3
TABLE 3.1
Default Limits
- -
- -
- -
- -
40 PPM 1-1000 PPM
- -
- -
- -
- -
40 PPM 1-1000 PPM
- -
- -
Disabled
Disabled
Disabled