Ford Corsar Repair Manual page 868

WIPER AND WASHER
Washer Nozzle Adjustment
Adjust washer nozzle with suitable tool as shown in the
figure below.
Details of tool are shown below.
Adjusting
hole:
0.9 (0.03510
X
1 .O (0.039)
'5 (0.059) l .5 (0.059)
0.85 (0.0335)
Nozzle holes Unit: m m (in)
SEL2451
0.85 (0.0335)
SEL0881
From Check valve
reservol r To
nozzle
&D+
S E L 4 1 1 H
Check Valve
A check valve is provided in the washer fluid line. Be careful
not to connect check valve to washer tube in the wrong
direction.
Wiper Amplifier Check
1. Connect as shown in the figure at left.
2. If test lamp comes on when connected to terminal
@
and
battery ground, wiper amplifier is normal.
NOTE: Pin 8, shown as a blank, will be used on models with
variable intermittent wipers.