Ford Corsar Repair Manual page 597

REPAIR FOR COMPONENT PARTS
/
RE4F02A
1
Final Drive (Cont'd)
I
3. Remove bearing using E1 673MT puller with E6673 plates and
E7422 & E7 177-5 drift and plug.
I
1
4. Remove differential side bearing inner cone using E7 158 puller
with E7009 leg and plug set.
INSPECTION
1. Check mating surface of differential case, side gears and
pinion mate gears. Replace as required.
Check viscous coupling (where fitted) for cracks, silicone
leakage, etc.
2. Check clearance between side gear and differential case
with washer following the procedure below.
a
Set Tool and dial gauge on side gear.
b. Move side gear up and down to measure dial gauge
deflection. Always measure gauge deflection on both side
gears.
Clearance between side gear and
differential case with washer:
0.1
-
0.2
m m
(0.004
-
0.008 in)
c. If clearance exceeds the specified value, check for wear and
replace necessary parts.
3. Check tapered roller bearings for wear, scratches, pitching
or flaking.