Ford Corsar Repair Manual page 592

REPAIR FOR COMPONENT PARTS
p z q
Low
&
Reverse Brake (Cont'd)
INSPECTION
Examine low and reverse brake for damaged clutch drive
plate facing and worn snap ring.
Check drive plate facing for wear or damage; if necessary,
replace.
Specified clearance between retaining plate
and snap ring:
Standard
1.2
-
1.6
mm
(0.047
-
0.063
in)
Allowable limit
3.0 mm (0.118 in)
Retaining plate of low & reverse brake
-
Part A (Driven plate or
SAT039C
Thickness mm (in)
3.4 (0.1 34)
3.6 (0.142)
3.8 (0.150)
4.0 (0.157)
4.2 (0.165)
4.4 (0.1 73)
4.6 (0.181)
4.8 (0.189)
5.0 (0.197)
If clearance exceeds specified value after using 5.0 mm (0.197
in) retaining plate (31667-23X08), change part A to 3.4 mm
(0.134 in) retaining plate (31667-23x00) and readjust clearance
by adding another suitable retaining plate.
Part number
3 1667-23x00
31 167-23x01
31 667-23x02
31 667-23x03
31 667-23x04
31 667-23x05
31667-23x06
31 667-23x07
31 667-23x08
AT- 1 48