CYLINDER HEAD
Removal (Cont'd)
11. Remove front cover tightening bolts to cylinder head.
12. Remove cylinder head.
Head warpage or cracking could result from removing In
incorrect order.
Cylinder head bolts should be loosened in two or three
steps.
Disassembly
1. Remove rocker shaft assembly.
a. When loosening bolts, evenly loosen from outside in
sequence.
b. Bolts should be loosened in two or three steps.
2. Remove camshaft.
Before removing camshaft, measure camshaft end play.
(Refer to "Inspection".)
3. Remove valve components with Tool (E7007).
4. Remove valve oil seals. (Refer to OIL SEAL REPLACEMENT.)