Ford Corsar Repair Manual page 569

REPAIR FOR COMPONENT PARTS
p i % q
Final Drive (Cont'd)
b. Move side gear up and down to measure dial deflection.
Always measure indicator deflection on both side gears.
Clearance between side gear and differential case with
washer:
0.1
-
0.2 m m (0.004
-
0.008 in)
c. If not within specification, adjust clearance by changing
thickness of side gear washers.
Side gear thrust washer: Refer to S.D.S.
5. Install pinion mate shaft lock pin using a punch.
Make sure that lock pin is flush with case.
6. Press on differential side bearing inner cone and outer race.
7. Install final gear.