Ford Corsar Repair Manual page 58

TIMING CHAIN
1 ~ ~ 2 4 ~ 1
Removal
1.
Place wheel chocks at both front and back of rear wheels.
2. Place safety stands under designated front supporting points.
Remove front right side wheel.
3. Remove dust cover and under cover.
4.
Drain engine oil.
5. Set No.
1 piston at T.D.C. on its compression stroke.
6. Remove the alternator and compressor drive belts.
7. Remove the following parts.
@
Alternator and adjusting bar
@
Oil separator
@
Power steering pump pulley, pump stay and bracket.
@ Compressor and bracket.
@
Crank shaft pulley and oil pump drive boss.
8. Remove oil pan. (Refer to OIL PAN.)
9. Remove oil strainer securing bolt.
10. Remove front cover securing bolts (cover to block and head
to cover).