Ford Corsar Repair Manual page 108

T l MlNG BELT -Installation-
1 -
1. Confirm that No. 1 cylinder is set at T.D.C. on i t s compres-
sion stroke.
2. Install tensioner and return spring.
Temporarily tighten bolts so that tensioner can swing
smoothly.
3. Set timing belt.
a. Ensure that timing belt and 'pulleys are clean and free of oil
or water. Do not bend timing belt.
b. Align white lines on timing belt with punch mark on cam-
shaft pulleys and crankshaft pulley.
c.
Have arrow on timing belt pointing toward front belt covers.
4.
Tighten belt tensioner and assemble spring.
To set spring, first hook one end on bolt (B) side, then hook the
other end on tensioner bracket pawl. After rotating crankshaft
two turns clockwise, tighten bolt (B) and then bolt (A), and belt
tension will automatically be the specified value.
: 1 5 - 2 0 N - m ( 1 . 5 - 2 . 0 k g - m , 1 1 - 1 4 f t - l b )
5.
Install timing belt covers.