Ford Corsar Repair Manual page 544

DISASSEMBLY
!-zq
Disassembly (Cont'd)
2 1. Remove one-way clutch, front carrier, rear carrier and low clutch
as a set after first removing the circlip.
22. Remove low & reverse brake clutches, and detach low
&
reverse brake retainer snap ring pushing retainer.
23. Remove low and reverse brake piston by applying low pressure
compressed air as shown.
24. Remove bearing retainer assembly.
25. Remove band servo outer snap ring and remove outer piston by
applying low pressure compressed air to the rearward centre
port.
AT- 1 00