Ford Corsar Repair Manual page 732

BODY END
Body Front End (Cont'd)
More than 5.0 mm (0.197 in)
\secondary latch
Hood lock adjustment
Adjust hood so that hood primary lock
Bumper rubber adjustment
meshes at a position 1 to 1.5 mm (0.039 to
Adjust so that hood i s aligned
0.059 in) lower than fender.
with fender. At that time deflec-
After hood lock adjustment, adjust bumper
tion is approx. 0 . 5 mm (0.020 in).
rubber.
[Bumper rubber free height
i s
approx.
When securing hood lock, ensure
it
does
22.0 mm (0.866 in)]
not tilt. Striker must be positioned at
the center of hood prlrnary lock.
After adjustment, ensure that hood primary
and secondary lock operate properly.
Hood lock secondary latch hooking length
(2.6
-
3.3. 19
-
24)
sight shield
3k
Service tool E7184 required for removal