Ford Corsar Repair Manual page 612

ASSEMBLY
34. Install terminal assembly, paying attention to the direction of
its hook.
35. Install accumulator and spring.
Note: The accumulator and spring are arranged as shown,
for RE4F02A. For the RL4F02A transaxle, the spring is
below the accumulator, i.e. reversed from the illustration.
Install throttle shaft and return spring
-
RL4F02A only.
36. Insert manual valve to control valve body, then assemble
them to transmission case.'
Bolt @ :
(nl: 3.7
-
5.0 Nom (0.38
-
0.51 kg-m, 2.7
-
3.7 ft-lb)
Other bolts:
[cl:
7
-
9 N-m (0.7
-
0.9 kg-m, 5.1
-
6.5 ft-lb)
Set throttle shaft return spring against valve body.
Pay attention to the direction of manual valve groove.
37. Connect harness connectors between terminal assembly
and solenoids.