Ford Corsar Repair Manual page 403

CLUTCH DISC AND CLUTCH COVER
Clutch disc
D o
r
Whe
lot clean in solvent.
n installing, be careful that grease applied to
l / l /#S
main drive shaft does not adhere to clutch disc.
r l l ~ t r h
cover --/
Clutch cover securing bolt
h
7
m
@
: Apply lithium-based grease including
molybdenum disulphide.
SCL206
Clutch Disc
INSPECTION
Check the following items, and replace if necessary.
m
Clutch disc, for burns, discoloration, oil or grease leakage
Backlash of spline
Clutch disc, for wear of facing
Wear limit of facing surface to rivet head:
0.3 mm (0.012 in)
Clutch disc, for backlash of spline
Maximum backlash of spline (at outer edge of disc):
0.9 mm (0.035 in)
m
Clutch disc, for runout of facing
Runout limit:
215TBL 0.7 mm (0.028 in)
225TBL 1.0 mm (0.039 in)
Distance of runout check point (from hub center)
215TBL 102.5 mm (4.04 in)
225TBL 107.5 mm (4.23 in)