Ford Corsar Repair Manual page 162

ENGINE COOLING SYSTEM
~ C A Z O E ~
Thermostat
(4)
18
-
22 N.m (1.8
-
2.2
kg-m,
13
-
l e f t - l b )
S L C 3 0 l
SLC343
INSPECTION
1. Check for valve seating condition at ordinary temperatures. It
should seat tightly.
3. Install thermostat with arrow facing upward.
After installation, run engine for a few minutes, and check
for leaks.
Always replace with new gasket.
2. Check valve opening temperature and maximum valve lift.
Standard
Valve opening
temperature
' C
("F)
Max. valve lift
8/95
rnm/'C (in/'F)
(0.3 11203)
3. Then check if valve at 5°C (9°F) below valve opening
temperature.
After installation, run engine for a f e w minutes, and check
for leaks.
Electric Cooling Fan Control System
Radiator fan and condenser fan are both controlled by E.C.C.S.
control unit.
For details, refer to ES Section.