Ford Corsar Repair Manual page 707

STEERING WHEEL AND STEERING COLUMN
l
SSTl 126
L
- - -
r----
!
Cutout portion7
Lowrr ioint
SSTBOOA
,
-
- -- -
Installation
STEERING WHEEL
When installing steering wheel, apply multi-purpose grease to
entire surface of turn signal cancel pin (both portions) and also
to horn contact slip ring.
STEERING
COLUMN
When installing steering column, fingertighten all lower
bracket and clamp retaining bolts; then tighten them se-
curely. Do not apply undue stress to steering column.
When attaching coupling joint, be sure tightening bolt faces
cutout portion.
CAUTION:
After installing steering column, turn steering wheel to make
sure it moves smoothly and that the number of turns from the
straight forward position to left and right locks are equal. Be
sure that the steering wheel is in a neutral position when
driving straight ahead.