Ford Corsar Repair Manual page 721

POWER STEERING
O I L
PUMP
-
Front housing
SST036A
Disassembly
CAUTION:
a
Parts which can be disassembled are strictly limited.
Never disassemble parts other than those specified.
a
Disassemble in as clean a place as possible.
a
Clean your hands before disassembly.
a
Do not use rags; use nylon cloths or paper towels.
Follow the procedures and cautions in the Service Manual.
a
When disassembling and reassembling, do not let foreign
matter enter or contact the parts.
a
Remove snap ring, then draw pulley shaft out.
Be careful not to drop pulley shaft.
a
Remove oil seal.
Be careful not to damage front housing.
a
Remove connector.
Be careful not to drop spool.
Inspection
PULLEY AND PULLEY SHAFT
a
If pulley is cracked or deformed, replace it.
a
If an oil leak is found around pulley shaft oil seal, replace the
seal.
a
If serration of pulley or pulley shaft is deformed or worn,
replace it.