Table of Contents
Advertisement
l
TROUBLE-SHOOTING AND DIAGNOSES
pEGEi-1
Final Check (Cont'd)
LOCK-UP TEST
Install pressure gauge to lock-up pressure port. Shift selector
lever in
"D"
range.
If lock-up pressure is not within specifications, refer to Diag-
nostic Procedures 15 and 16.
Condition
Lock-up
"ON"
Lock-up "OFF"
Torque converter lock-up pressure
kPa (kg/cm2, psi)
49 (0.5,7) or less
196 (2,281 or more
Advertisement
Chapters
Table of Contents
