Ford Corsar Repair Manual page 60

TIMING CHAIN
Installation
m: Punchmark
1. Install crankshaft sprocket.
Make sure that mating marks of crankshaft sprocket face
engine front.
2. Install camshaft sprocket.
3. Confirm that No. 1 piston is set at T.D.C. on its compression
stroke.
4. Install timing chain.
Set timing chain by aligning its mating marks with those of
crankshaft sprocket and camshaft sprocket.
5. Tighten camshaft sprocket bolt whilst holding gear with E7 18 1 A
tool.
6. Install chain guide and chain tensioner