Ford Corsar Repair Manual page 148

ENGINE LUBRICATION SYSTEM
p 1
Oil Pressure Check (Cont'd)
3. Install pressure gauge.
4. Start engine and warm it up to normal operating tempera-
ture.
5. Check oil pressure with engine running under no-load.
More than 78 (0.8,
1 1 )
If difference is extreme, check oil passage and oil pump for
oil leaks.
6. Install oil pressure switch with sealant.
Oil Pump
REMOVAL
1. Drain oil.
2. Remove front cover. (Refer to EM section.)
3. Remove oil pump assembly.
DISASSEMBLY AND ASSEMBLY
Always replace with new oil seal and gasket.
When installing oil pump, apply engine oil to inner and
outer gears.
Be sure that 0-ring is properly installed.