Ford Corsar Repair Manual page 564

REPAIR FOR COMPONENT PARTS
p G q
Governor (Cont'd)
l nspection
Make sure that the governor valve moves smoothly when
pushing it with your finger.
Check to see that all springs s i t on their original positions.
Check t o see that distance "+L" i s within the specifications.
Distance "L":
34.0
-
34.4 mm (1.339
-
1.354 in)
Planetary Carrier
INSPECTION
m
Check clearance between pinion washer and planetary
carrier with a feeler gauge.
Standard clearance:
0.15
-
0.70 mm (0.0059
-
0.0276 in)
Allowable limit:
0.80 mm (0.0315 in)
m
If not within allowable limit, replace.
m
Check planetary gear sets and bearings for damaged or
worn gears.
Bearing Retainer and Output Shaft
INSPECTION
m
Measure clearance between new seal ring and ring groove.
Standard clearance:
0.10
-
0.25 mm (0.0039
-
0.0098 in)
Wear limit:
0.25 mm (0.0098 in)
m
If not within wear limit, replace.