Ford Corsar Repair Manual page 658

CHECK AND ADJUSTMENT
-
Rear Wheel Alignment (Cont'd)
TOE-IN
1. Draw a baseline across the tread.
After lowering rear of vehicle, move it up and down to
eliminate friction.
2. Measure toe-in.
Measure distance "A" and "B" at the same height as hub
center.
Toe-in:
A
-
B
1
-
3 mm (0.04
-
0.12 in)
2
6
-18' to -6'
3. Adjust toe-in by varying the lengths of rear parallel links.
a
Adjust left and right rear parallel links to the same length "A".
Tighten lock nut while holding rear parallel link with wrench to
prevent bushing from twisting.
Standard length "A":
Black link- 50-55 mm (1.97-2.1 7 in.)
Grey link- 55-60 mm (2.1 7-2.36 in.)