Ford Corsar Repair Manual page 542

DISASSEMBLY
Disassembly (Cont'd)
Speedometer case
11. Remove parking pawl, return spring, parking shaft and
spacer.
12. Remove speedometer case and speedometer gear
13. a) Remove governor cap.
b) Remove governor bolt, then pin using 4mm10.75 pitch
screw or equivalent.
c) Remove governor shaft (RL4F02A).
Remove speedometer shaft (RE4F02A).
14. Support transaxle assembly on wooden blocks and remove
converter housing.
m
Caution: Do not lever on casing mating surfaces.
15. Remove differential assembly and reduction pinion gear.
16. After removing 0-ring from input shaft, extract input shaft from
converter housing.