Ford Corsar Repair Manual page 579

REPAIR FOR COMPONENT PARTS
p z 6 q
Control Valve Upper Body (Cont'd)
DISASSEMBLY
1. Remove valves at parallel pins.
Do not use a magnetic hand.
a. Remove parallel pins while pressing their corresponding
plugs and sleeves.
Remove plug slowly to prevent Internal parts from jumping
out.
b. Place mating surface of valve facedown, and remove internal
parts.
a If a valve Is hard to remove, place valve body facedown
and lightly tap It with a soft hammer.
a
Be careful not to drop or damge valves and sleeves.
2. Remove valves at retainer plates.
a. Remove retainer plates while pressing their corresponding
plugs, sleeves or springs.
b. Place mating surface of valve facedown, and remove internal
parts.
a If a valve Is hard to remove, lightly tap valve body with a
soft hammer.
a
Be careful not to drop or damage valves, sleeves, etc.