Ford Corsar Repair Manual page 709

STEERING WHEEL AND STEERING COLUMN
Disassembly and Assembly (Cont'd)
m
Adjust tilt lever as follows:
(1) When tilt lever contacts stopper, tighten adjusting bolt
securely.
(2) Turn tilt lever by 90° (
6
)
in direction "P" to check that
steering column moves smoothly without binding.
(3) Return tilt lever to position
0 .
Make sure there is no free
play (=O) of steering column when steering wheel is pushed
down by force.
(4) Install lock washer and E-ring.
m
Steering lock
a) Break self-shear type screws with a drill or other appropriate
tool.
b) Install self-shear type screws and then cut off self-shear
type screw heads.
Joint cover
m
When assembling, align cutout on joint cover with protru-
sions on hole cover.