Ford Corsar Repair Manual page 105

TIMING BELT -Removal-
~~I
1 . Remove radiator shroud, fan and pulleys.
2.
Remove all spark plugs.
Power steering oil pump
Adjust
V
:
Checking point
Set at T . D . C . .
(Black paint mark)
S E M 8 3 7 A
3. Remove the following belts. I
Power steering oil pump drive belt
Compressor drive belt
Alternator drive belt.
Set No. 1 cylinder
a t
T.D.C. on i t s compression stroke.
5. Remove front upper and lower belt covers.
6. Loosen timing belt tensioner bolts and remove return spring,
then remove timing belt.
After removing timing belt, do not rotate crankshaft and cam-
shaft separately because valves will hit piston head.