Ford Corsar Repair Manual page 119

CYLl NDER HEAD -Installation-
+
Front mark is punched.
Slits
Punched mark
Intake
Front Exhaust
SEM694A
SEM585A
5. Install timing belt and adjust belt tension.
Refer to "TIMING BELT-Installation".
6. Install rocker shaft with rocker arms.
To prevent rocker shaft springs from slipping out of rocker
shafts, insert bracket bolts into shaft.
7. Tighten rocker shaft bolts.
Tighten bolts gradually, in two or three stages outwardly
from center position.
Make sure that valve clearance adjusting screws are fully
loosened.
Rocker shaft bolts:
[q
:
18
-
22 N.m (1.8
-
2.2 kg-m, 13
-
16 ft-lb)