Ford Corsar Repair Manual page 163

ENGINE COOLING SYSTEM
Radiator
REMOVAL AND INSTALLATION
r-Radiator cap
i
(01
: N m (kg-m,
Radiator rubber
Radiator
mounting
lower hose-
Radiator upper hose
Radiator Minor Repair Procedure
(Using Agent Part No. 2 14 1 1 -J7025)
Minor radiator repairs are defined as damage t o
tubes in the form of holes no greater than
approximately 1 mm.
1. Remove radiator.
2. If necessary, carefully cut away or bend fins
t o expose affected area. Do not cut away
what is not necessary and do not remove
more than 25mm (total) finning from the
radiator.
3. Dry affected tube and area with an air drier.
4. Lightly surface damaged area with suitable
scraper and wipe clean with petrol.
5. Mix contents of bottle well and apply repair
agent t o affected area with a suitable clean,
dry applicator (cut down wooden stirrer).
6. Apply repair agent sparingly.
7. Repair agent must be allowed t o dry in ambi-
ent conditions for a minimum of
3
hours
before re-fitting the radiator in vehicle.
Do not use heat t o promote drying.
8. Refit radiator and refill cooling system (refer
Section MA).