Ford Corsar Repair Manual page 711

MANUAL STEERING GEAR AND LINKAGE (TRW)
Removal and l nstallation
Removal
m
Detach tie-rod ball studs from knuckle arms with Tool.
Installation
Initially, tighten nut on tie-rod outer socket and knuckle arm to
54 to 59 Nm (5.5 to 6.0 kg-m, 40 to 43 ft-lb).
Tighten nut further to align nut groove with the first pin hole
so cotter pin can be installed.
CAUTION :
Tightening torque must not exceed 98 N-m (10 kg-m, 72 ft-lb).