Ford Corsar Repair Manual page 62

OIL SEAL REPLACEMENT
VALVE OIL SEAL
1. Remove rocker cover.
2. Remove rocker shaft assembly.
1
3.
Remove valve spring and valve oil seal with suitable tool.
1
Piston concerned should be set at T.D.C. to prevent valve
from falling.
4.
Apply engine oil to new valve oil seal and install it with
Tool.
Before installing valve oil seal, install valve spring seat.
Unit:
m m
(in) SEM246C
I
OIL SEAL INSTALLING DIRECTION
FRONT OIL SEAL
1. Remove crankshaft pulley.
2. Remove front oil seal.
Be careful not to damage crankshaft.