Ford Corsar Repair Manual page 156

ENGINE LUBRICATION SYSTEM
p ]
Oil Pressure Check (Cont'd)
3. Install pressure gauge.
4. Start engine and warm it up to normal operating tempera-
ture.
5. Check oil pressure with engine running under no-load.
p p p
Engine Approximate discharge pressure
rpm kPa (bar, kg/cm2, psi)
Idle speed More than 59 (0.59,0.6,9)
3,200 333-5 10 (3.3-5.10.3.4-5.2,48-74)
If difference is extreme, check oil passage and
oil
pump
for
oil leaks.
6. Install oil pressure switch with sealant.
Oil Pump
REMOVAL AND INSTALLATION
1 .
Remove drive belts.
2. Remove timing belt covers and timing belt. (Refer EM Section).
3. Remove oil pan.
SLC651
4. Remove oil pump assembly with oil strainer.
5. Installation is in reverse of removal.