Ford Corsar Repair Manual page 151

ENGINE COOLING SYSTEM
System Check (Cont'd)
CHECKING COOLING SYSTEM FOR LEAKS
To check for leakage, apply pressure to the cooling system with
a tester.
Testing pressure:
98 kPa (1.0 kg/cm2, 14 psi)
CAUTION:
Higher than the specified pressure may cause radiator dam-
age.
CHECKING RADIATOR CAP
To check radiator cap, apply pressure to cap with a tester
Radiator cap relief pressure:
78
-
98 kPa (0.8
-
1.0 kg/cm2, 11
-
14 psi)
Water Pump
REMOVAL AND INSTALLATION
Drain coolant from drain cocks on both cylinder block and radiator.
SMAOOBC
(C1
: N.m (kg-m, ft-lb)
S L C 3 l l A