REPAIR FOR COMPONENT PARTS
I
R E ~ F O ~ A
(
Low Clutch (Cont'd)
Service procedures for low clutch are essentially the same
as those for high clutch, with the following exception:
Specified clearance between retaining plate
and snap ring:
Standard
0.5
-
0.8 mm (0.020
-
0.031 in)
Allowable limit
2.0 mm (0.079 in)
Retaining plate of low clutch
After assembly, check the operation of clutch.
Thickness
mm (in)
3.2 (0.126)
3.4 (0.134)
3.6 (0.142)
3.8 (0.150)
4.0 (0.157)
4.2 (0.165)
AT- 1 45
Part number
31597-21x10
31597-21x11
31597-21x12
31597-21x13
31597-21x14
31597-21x15