Ford Corsar Repair Manual page 601

ASSEMBLY
1
&EEA
1
6. lnstall reduction gear.
a. Position reduction gear in transmission case so that it
meshes with idler gear.
b. Press reduction gear into place using a drift, and install idler
gear.
7. lnstall bearing retainer assembly.
a. lnstall seal rings onto bearing retainer with great care. Clean
the grooves and liberally apply petroleum jelly to hold the
rings in place. Otherwise, they could be cut or deformed
when the low clutch and carrier assembly are installed.
b. lnstall bearing retainer assembly.
8. lnstall parking pawl and parking shaft.
9. lnstall spacer and return spring.