Ford Corsar Repair Manual page 386

SERVICE DATA AND SPECIFICATIONS (S.D.S.)
General Specifications
IGNITION COIL
IGNITION TIMING B.T.D.C.
IDLE SPEED rpm
Inspection and Adjustment
A.A.C. VALVE
1 5 " f 2"
M/T 850 f 50
A/T
850 f 50
(in "NW position)
Primary voltage
Primary resistance
[at 20'C (68"F)I
Approximately 0.7
Secondary resistance
[at 20'C (68'F)I M
Approximately 8
ENGINE TEMPERATURE SENSOR
AIR TEMPERATURE SENSOR
Resistance
L 2 1
Approximately 10
FUEL PRESSURE (at idling)
Unit: kPa (kg/cm2, psi)
IDLE SWITCH
(Measuring point: between fuel
filter and fuel pipe)
Vacuum hose is connected
Vacuum hose is disconnected
Approximately
226 (2.3, 33)
Approximately
294 (3.0, 43)
INJECTOR
Engine speed when idle switch
is changed from "OFF" to "ON"
rpm
MIT 1.000f 150
A/T 1,000 f 150
(in "NW position)
THROTTLE SENSOR
Resistance Q 10
-
15
Accelerator pedal conditions
Completely released
Partially released
Completely depressed
Resistance M
Approximately 1
1 - 9
Approximately 9